T. A. Davies Co.
Specialty Urethane Plastics & Elastomers

 

Home

Tadco  AM Series Tadco D Series Tadco  E Series Tadco  L Series Tadco  M Series Tadco  S Series Tadco X Series Tadco  11A Series Tadco 11B Series Tadco Roto-Systems

 

Two Component Polyurethane Cast Elastomer Systems 

Shore A50 - A97 Hardness

Components : Polyether Polyol Mixture and Polyether or Polyester / MDI Quasi-Prepolymer Isocyanate.

Applications : Any dynamic application where extremely high Tensile and Tear properties are not a necessity, but where low hysteresis (heat build-up), good compression and/or low cost is required.

Shock absorbers, Bushings, rollers, caster wheels, toys,…

Advantages

Low Cost
Low Viscosity
Room Temperature Processing
Low Hysteresis
Variety of Gel Times
Variety of Colors

Considerations

Fair Tensile and Tear Strength
Tadco
System
Shore
Hardness
Tensile
Strength (psi)
Tensile
Elongation (%)
Die-C Tear
Strength (
pli)
Split Tear
Strength (
pli)
Rebound (%)
L 175 A75 1700 500 150 80 60
L 180 A81 2000 400 200 100 60
L 185 A85 2500 400 250 100 60
L 190 A88 3000 350 300 150 60
L 195 A93 3000 300 300 200 55
L 250 A50 800 300 80 40 55
L 260 A60 1400 360 110 55 55
L 270 A70 2300 500 170 90 55
L 275 A75 2800 480 200 100 55
L 280 A80 3000 550 250 105 55
L 290 A85 3200 500 350 110 45
L 295 A93 3400 500 440 130 45
L 297 A97 3100 300 530 200 40

Properties listed are typical and can not be used as a reference.

Show Printable Version

Home Tadco Products Castable Urethanes Custom Formulation Distributors Rotocast Equipment

 

Copyright 2007 T. A. Davies Co.

Tadco casting urethane castable urethane polyurethane elastomer resin plastic rubber flexible elastomer rigid elastomer polyurethane systems compounding rotocasting rotomolding
custom castable urethane applications 11A 11B 11D AM D E L M S X

Tadco casting urethane castable urethane polyurethane elastomer resin plastic rubber flexible elastomer rigid elastomer polyurethane systems compounding
custom castable urethane applications 11A 11B 11D AM D E L M S